Cypress Semiconductor CY8C24094 Especificações descarregar pdf (Página 48)

48 CY3214-PSoCEVALUSB Kit Guide, Doc No. 001-67030 Rev. *B

Code Examples

- Port Selection: select MiniProg1/<MiniProg Number> with the status Connected

- Acquire Mode: Power Cycle

- Verification: Off

- Power Settings: 5.0 V

c. Click on the Program button to start programming the board.

d. The programming starts and the status is displayed on the progress bar.

Figure 5-31. Programming Status

e. When the programming is done successfully, the 'Operation Succeeded!' Message is shown.

Figure 5-32. 'Operation Succeeded!' Message

5.1.4 Verify Output

1. Make the following connections on the board using the single strand jumper wires provided.

a. Connect 2-KΩ resistor between Port P0.5 (P05 on J4) and P1.5 (P15 on J9).

b. Connect LED1 to Port P3.1 (P31 on J10) and LED2 to P3.2(P32 on J10).

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 89 90

Sem comentários

Cypress Semiconductor CY8C24094 Especificações Página 48