Cypress Semiconductor CY8C24223 Guia do Utilizador descarregar pdf (Página 17)

CY8CKIT-002 MiniProg3 User Guide, Doc. # 001-59350 Rev. *E 17

Technical Description

3.1.5 Reference

For more information on the PSoC 3 and PSoC 5LP JTAG, SWD, and I

C interfaces, see the PSoC

3 and PSoC 5LP Technical Reference Manuals. For more information on PSoC 1 interfaces, see the

PSoC 1 Technical Reference Manual.

3.2 Connectors

3.2.1 5-Pin Connector

The 5-pin connector is configured as a single row with 100-mil pitch. It is designed to mate with a

Molex model 22-23-2051 (straight) or 22-05-3051 (right angle) male header with a key tab.

Figure 3-2. 5-Pin Connector with Pin Assignments

3.2.2 10-Pin Connector

The 10-pin connector is configured as a dual row with 50-mil pitch. It is used with a ribbon cable

(provided) to mate to a similar connector on the target board. The recommended mating connectors

are the Samtec FTSH-105-01-L-DV-K (surface mount) and the FTSH-105-01-L-D-K (through hole)

or similar connectors available from other vendors. The signal assignment is shown in Figure 3-3.

When programming JTAG devices, note that MiniProg3 does not support nTRST pins.

Figure 3-3. 10-Pin Connector with Pin Assignments

MiniProg3

(End View)

Mating

Connector

SDAT

SCLK

XRES

GND

VTARG

XRES

TDI

TDO

TCK

TMS

VTARG

GND

TDI

TDO

TCK

TMS

VTARG

GND

Pin 1

Note The ribbon

cable connector

extends beyond the

body of the

connector. Be sure

to allow room.

GND

1 2 ... 12 13 14 15 16 17 18 19 20

Comentários a estes Manuais

Sem comentários

Cypress Semiconductor CY8C24223 Guia do Utilizador Página 17

Comentários a estes Manuais

Manuais e produtos relacionados com não Cypress Semiconductor CY8C24223